UVO 9 Pack Color Pigment Sampler Tube

#ad
Smooth-On, Inc. #ad - Concentrated. For glowing fluorescent color effects, use Ignite colorants. Colorants for urethane and epoxy materials. By adding a small amount of uvo to a Smooth-On urethane rubber, plastic or foam product, these pigment dispersions will yield opaque castings vs. So-strong color tints that can yield translucent castings.

UVO 9 Pack Color Pigment Sampler Tube #ad - Uvo colorants are concentrated, phthalate-free urethane color pigments that resist ultra-violet light. Uv resistant. Opaque pigments. Phthalate-Free.

#ad



Ages 18+ - Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325

#ad
Smooth-On SC325kit #ad - Net weight 32 oz. Can be easily tinted with smooth-on so-strong colorants. Small amounts of pigment will yield accurate, vivid colors from cured castings. The differences between them are pot life and demold time. 909 grams. Technical Information: pot life: 2. 5 minutes, demold time depending on mass: 7-10 minutes, shrinkage:.

Ages 18+ - Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325 #ad - 01 in. In. Viscosity: 100 cups, S. G. In. Lb. 27. 7, ultimate tensile strength: 3, 170 PSI. Convenient one-to-one mix ratio one part A to one part B by volume. Easy to use, just add color to the clear mix. Cu. Fully cured castings are tough, durable, machinable and paintable. Ideal for making marble-like resin, clear colored gems and more!

Adult Supervision Required. G/cm3: 1. 07, s. V.

#ad



Smooth-Cast 300 Liquid Plastic Compound - Trial Unit

#ad
Smooth-On, Inc. SC300 #ad - Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio by volume. Keep out of the reach of Children - for more information visit www. Smooth-on. Com ideal for making marble-like resin, clear colored gems and more! Smooth cast 300 is a liquid plastic, ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free.

Smooth-Cast 300 Liquid Plastic Compound - Trial Unit #ad - Easy to use, just add color to the clear mix. Can be easily tinted with smooth-on so-strong colorants. 10 minute demold time. Read msds before use - Adult Supervision Required. Ultra-low viscosity casting resin with bright white color. Mix ratio: 1a: 1B by Volume. Vacuum degassing is not necessary to yield castings that are virtually bubble free.

Pot life: 3 minutes; Cure Time: 10 minutes. Shore 70D. 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable.

#ad



Smooth-On Universal Mold Release 14 fl. oz.

#ad
Smooth-On 751635700109 #ad - Universal mold release is effective over a broad temperature range from 70°F to 500°F. Keep out of the Reach of Children. Sealing porous models wood, plaster, concrete or certain modeling clays containing water or sulfur with Smooth-On SuperSeal or other sealer may be necessary. Ideal for making marble-like resin, clear colored gems and more!

If you've ever been to the movies, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, admired a piece of sculpture, foams and other products to turn their ideas into 3-dimensional reality. Adult Supervision Required.

Smooth-On Universal Mold Release 14 fl. oz. #ad - Mix ratio: 1a: 1B by Volume. Features if using silicone rubber, seal model surface with SuperSeal only. Can be easily tinted with smooth-on so-strong colorants. Universal mold release agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products.

Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. 10 minute demold time.

#ad



24oz. Unit - Smooth-On XTC-3D High Performance 3D Print Coating

#ad
Smooth-On, Inc. #ad - Inexpensive to use - 1 oz covers 100+ square inches. Keep out of the Reach of Children. Smooths 3D Printed Objects. Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Universal mold release will more than double the production life of the mold if you are casting urethane resin.

If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Epoxy coating for 3D Printed Objects. Easy to use, just add color to the clear mix. Xtc-3d® does not contain VOC's, phthalates or phosphates. Adult Supervision Required. Working time is 10 minutes and cure time is about 4 hours depending on mass and temperature.

24oz. Unit - Smooth-On XTC-3D High Performance 3D Print Coating #ad - 10 minute demold time. Shore 70D. Ultra-low viscosity casting resin with bright white color. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products. Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.

It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc.

#ad



Mold Star 20T Silicone Mold Making Rubber - Trial Unit

#ad
Smooth-On, Inc. #ad - It also can be used to coat EPS, Laywoo, ABS, cardboard and paper. Packaging may vary* Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness. Cured mold star rubber is heat resistant up to 450°F 232°C and is suitable for casting low-temperature melt metal alloys. Smooths 3D Printed Objects.

Can be easily tinted with smooth-on so-strong colorants. Ideal for making marble-like resin, clear colored gems and more! Keep out of the Reach of Children. Mold star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume no weighing scale necessary. Mix ratio: 1a: 1B by Volume. Universal mold release will more than double the production life of the mold if you are casting urethane resin.

Mold Star 20T Silicone Mold Making Rubber - Trial Unit #ad - If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Epoxy coating for 3D Printed Objects. Shore 70D. Mold star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Note: thi-vex is not compatible with Mold Star rubbers.

#ad



Trial Size 2.8 lb - Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use

#ad
Smooth-on OOMOO 30 #ad - Technical information mixing ratio: one to one by volume 100a:130b by weight Pot Life: 30 min. Easy to use, just add color to the clear mix. Oomoo 30 has a 30-minute pot life, with a six-hour cure time. Compatible with SLA and SLS prints. It works with pla, epdm and urethane foam as well as wood, fabric, plaster, Powder Printed Parts and other rigid media.

Net weight 16 oz. Shore a hardness: 30 - this scale measures the hardness of flexible rubber molds. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.

Trial Size 2.8 lb - Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use #ad - Epoxy coating for 3D Printed Objects. Keep out of the reach of Children Ideal for making marble-like resin, clear colored gems and more! Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Pot life / 30 min. Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models.

A 30a hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser.

#ad



Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit

#ad
Smooth-On, Inc. SOMoldStar15kit #ad - Molds should be stored on a level surface in a cool, frequency, while casting non-abrasive materials wax will not affect mold detail. Molds made with mold star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Good for casting wax, resins, gypsum, concrete and other materials .

Heat resistant up to 450°F 232°C. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products. Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.

Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit #ad - It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Smooths 3D Printed Objects. Ultra-low viscosity casting resin with bright white color. A 30a hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser.

Low viscosity for easy mixing and pouring - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary. Cured mold star rubber is heat resistant up to 450°F 232°C and is suitable for casting low-temperature melt metal alloys. Cure.

#ad



Mann Release Technologies Ease Release 200 14 fl. oz.

#ad
Mann Release Technologies ER200 #ad - Mix ratio: 1a:1b by volume - easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers.

Pot life: 30 minutes, cure time: 6 hours - this product cures at room temperature with negligible shrinkage. Cure. Mold preformace - the physical life of the mold depends on how you use it materials cast, the mold should be cleaned with a soap solution and wiped fully dry. Perfect for art and industrial applications - Often used for molds to reproduce sculptures and other prototypes, resins, casting plaster, and wax.

Mann Release Technologies Ease Release 200 14 fl. oz. #ad - Tear resistant - mold star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*. Good for casting wax, resins, gypsum, concrete and other materials . Heat resistant up to 450°F 232°C. Can be easily tinted with smooth-on so-strong colorants.

Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Epoxy coating for 3D Printed Objects.

#ad



Trial Unit - Flex Foam-iT! III Flexible Polyurethane Foam

#ad
Smooth-On, Inc. SOFF3 #ad - Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Epoxy coating for 3D Printed Objects. Best to store at room temperature, see "For Best Results" section below.

From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Molds should be stored on a level surface in a cool, frequency, while casting non-abrasive materials wax will not affect mold detail. Smooths 3D Printed Objects. Cure. Shore a hardness: 30 - this scale measures the hardness of flexible rubber molds.

Trial Unit - Flex Foam-iT! III Flexible Polyurethane Foam #ad - Pot life / 30 min. Fast Drying. Effective over a broad temperature range from 70°F to 500°F. Ultra-low viscosity casting resin with bright white color. Do not breathe fumes. They are lightweight, versatile and most are available in easy to measure mix ratios.

#ad



SO-Strong Color Tint 9-Pack Color Sampler

#ad
Smooth-On, Inc. SOSoStrongSampler9Pack1 #ad - They can be used to create a variety of color effects for a wide range of material applications. So-strong colorants are highly concentrated, offer excellent dispersion and consistent color. Pot life: 30 minutes, cure time: 6 hours - this product cures at room temperature with negligible shrinkage. Perfect for art and industrial applications - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax.

Tear resistant - mold star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*. Casting abrasive materials such as concrete can quickly erode mold detail, dry environment. Mann ease release 200 Aerosol Clear Mold Release Spray. Easy to use, just add color to the clear mix.

SO-Strong Color Tint 9-Pack Color Sampler #ad - A very small amount will color a proportionally large amount of liquid urethane material. Recommended loading range is. 01% to 3% of total system weight. A very small amount will color a proportionally large amount of liquid urethane material. Ultra-low viscosity casting resin with bright white color. Will release polyurethane elastomers, rubber, RTV silicones, polyester resins, epoxy resin, and thermoplastic polymers.

#ad