Top 10 Government ID Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. GOVO

#ad

Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black, GOVO Badge Holder/Wallet

#ad
GOVO #ad - Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. The clip is made from manganese steel making it strong and durable. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity.

You can carry your credit cards, driver license and work ID all in one in this compact holder. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard.

Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. Weights 1. 4 oz. The steel clip can also be used as a cash clip. Designed and engineered by govo in ohio, usa. The opening on top of the clip is designed for connecting to lanyard or carabiner. Unlike plastic retainer, metal spring does not lose elasticity.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

2. Specialist ID

#ad

Specialist ID Vertical Top Load Three Card Badge Holder, Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring One Holder / 3 Cards Inside Black

#ad
Specialist ID #ad - Clear front window - front badge has visible display for picture ID’s, Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges. Badgeholder with heavy duty safety break away neck cord lanyard - Protect Your Valuable Access, PIV, CAC, TWIC or Government Employee Name Badge from Damage and Loss.

Quick release lanyard with safety breakaway clasp - features a detachable keychain with Metal Badge Clip - Carries Your Work Badges and Keys. Carry all your cards in one holder - tough multi-card protector holds common access smartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis FAA, Security Access, Customs, TSA, Port Authority, Military, and Department of Homeland Security.

Rigid & rugged polycarbonate plastic - hard plastic vertical format i. D. Top loading & fully enclosed for 2 - 3 cards - all cards load from Top of Sturdy Rigid Case Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height1.1 Inches
Length4.4 Inches
Weight0.3 Pounds
Width2.8 Inches
Part NumberSPID-9070
ModelSPID-9070

3. Specialist ID

#ad

Slim Heavy Duty Badge Holders, 3 Pack, Hard Plastic Clear Polycarbonate Holds 1 Card Rigid Top Load Single Card Case, Vertical Easy Access Thumb Slide Hole & UV Protection by Specialist ID

#ad
Specialist ID #ad - Top load - never worry about card falling out again - vinyl badge holders can come apart at the seams, side load holders are a little More Secure, But a Top Loading Hard Plastic Poly-Carbonate Resin Case is the Most Secure Option Available! More secure lanyard / strap attachment - the polycarbonate lanyard Slot Hole on Back Works Best with a Vinyl Badge Strap, but Holds MUCH Better Than The Competition When Used with Metal Swivel Hook Neck Lanyards.

Connects to any lanyard or badge reel not included - we offer these heavy duty gsa compliant card cases to work perfectly With any Retractable Reels or Lanyards You are Already Using. Transparent with uv protection - clear with Slightly Frosted Plastic that Protects UV and Refracts Light to Prevent Glare off of Your Photo Idbadge.

They are also iso certified and are Compatible with Any Other Badge Holder You Order from Specialist ID. Super heavy duty protector - no more broken cards - this slim and sleek design is perfect for office keycards, smart piv, cac, twic and all standard 8030 proxy Cards Drivers License / Credit Card Size - NOTE - DOES NOT FIT WITH THICKER CARDS HID PROXCARD II CLAMSHELL.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Part NumberSPID-1400
ModelSPID-1400

4. ELV

#ad

1 Side RFID Blocking Pocket and 20 inch Neck Lanyard Strap for Offices ID, ELV Badge Holder with Zipper, School ID, Driver Licence Black, PU Leather ID Badge Card Holder Wallet with 5 Card Slots

#ad
ELV #ad - Innovation design: great badge holder for those need multiple badges, laundry card, cards, tickets and money Offices, debit cards, drivers license, suitable for ID badges, Government Employees and More, Airports, School ID, etc.

No need to worry about cards could accidentally slip out or lanyard rips any more. Size: holder size: 4. 8"l x 3. 5"w12. 2cm x 8. 9cm; 20"lanyard full round length. Id window with clear cover features visibility and protection, makes it easy to scan ID Cards. Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 rfid blocked cash slot with zipper pocket side. Id's, cash, name cards or business cards, event or location passes, keys - all of these could fit into this specially designed PU LEATHER badge holder.

Strong lanyard: 1pc strong yet soft 20" PU Leather detachable Neck Lanyard for the holder. This badge holder with large capacity. Front anf back Card Slots for easy management and access. Material: id holder and lanyard are made by pu leather, and combine with top grade hardware with safety side zipper and back closer.
BrandELV #ad
ManufacturerELV #ad
Height4.8 Inches
Length5.8 Inches
Weight50 Grams
Width0.5 Inches
Part NumberID-Holder-PU-Black

5. ID Stronghold

#ad

Poly Carbonate, USA Molded and Assembled, FIPS 201 Approved, ID Stronghold, RFID Blocking Secure Badge Holder, Duolite 2 Card ID Holder, Clear, Heavy Duty Hard Plastic ID Badge Holder

#ad
ID Stronghold #ad - Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. Indestructible: Molded from Poly Carbonate for military level toughness and durability. 2 card holder: conveniently carry two key cards, held tight so you never lose your identification. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Usa designed, molded and assembled - Our slim polycarbonate frame is tough as nails and will last you for years! .
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B

6. ID Stronghold

#ad

Heavy Duty Plastic Badge Protector, FIPS 201 Approved, PIV, CAC and Work Cards, RFID Blocking 2 Card ID Badge Holder with Lanyard and Retractable Reel, ID Stronghold Secure Badge Holder Duolite

#ad
ID Stronghold #ad - Usa designed, molded and assembled - our slim polycarbonate frame is tough as nails and will last you for years! 2 card holder - securely holds one card on each side so both cards are easily displayed. Id stronghold is the original rfid blocking Company with FIPS 201 Approval for all our ID holders. Lanyard & reel included - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel. Rfid shielded - protect your contactless cards from electronic pickpockets with the industry's best.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length5 Inches
Weight0.09 Pounds
Width4 Inches
Part NumberIDSH2047

7. ID Stronghold

#ad

FIPS 201 Approved RFID Blocking Security, USA Molded and Assembled, Identity Stronghold, Black, Heavy Duty Hard Plastic ID Badge Holder, Secure RFID Badge Holder for 1 Card

#ad
ID Stronghold #ad - Ergonomic: looks sharp and available in 9 colors to match your uniform, work or business attire. Squeeze to read: pinch the top to temporarily remove your card from the shielding and gain access. Usa made: molded and Assembled by our expert team in Florida facilities, millions shipped worldwide. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Indestructible: Molded from Poly Carbonate for military level toughness and durability.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.5 Inches
Length4.5 Inches
Width2.75 Inches
Part NumberIDSH1004-001B

8. ID Stronghold

#ad

Secure Badgeholder Classic and Lanyard Combo with IDSH Badge Reel Black/Black with Reel

#ad
ID Stronghold #ad - True stainless steel spring clips. Let go and card automatically becomes shielded again. This holder is designed for 13. 56mhz id cards such as the military CAC, HID iClass and more. No more removing your card from a shielded holder to be read at access point.

Physically protects card, us government piv, weather and water resistant. The combo includes one classic badgeholder, one 36 inch 914mm long and 3/8" inch 10mm wide lanyard with polyester flat braided material, and one idsh logo badge reel that’s good for 100, 000+ Pulls! There’s a safety break away and a wide no twist flat hook on the lanyard. If you have a 125khz hid prox card you should order our BloxProx trm version as it protects both frequencies.

Patented squeeze-to-read technology for ease of use. Holds 1 contactless rfid id card and blocks card from being scanned without your knowledge. Our classic badgeholder is molded and assembled in the USA. Id stronghold made the first ever fipS 201 approved shielded holders and has more FIPS 201 approved shielded products than any other manufacturer. Simply squeeze the top like a clip board and the card shielding is removed and card can be read. Fips 201 approved.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length6 Inches
Width4 Inches
Part NumberIDSH104

9. GOVO

#ad

Durable Polycarbonate ID Card Holder Holds 1 to 4 Cards Black, Without Clip Version, GOVO Badge Holder

#ad
GOVO #ad - Designed and engineered by govo in ohio, usa. It weights 1. 2 oz. This is the light weight without-clip version of govo t4 badge Holder. Built to last: the eyelet for connecting to lanyard or carabiner is made from manganese steel making it strong and durable.

The spring holds cards on the sides so it won’t damage your cards or let them slip out. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Unlike plastic retainer, metal spring does not lose elasticity. You can carry your credit cards, driver license and work ID all in one in this compact holder. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity.
BrandGOVO #ad
ManufacturerGOVO #ad
Part NumberNC_90000

10. Will Well

#ad

6 Pcs Extra Thick ID Card Badge Holder, Vertical Clear PVC Card Holder with Waterproof Resealable Zip Type

#ad
Will Well #ad - Large and roomy space: the inner dimension is 2. 52"w x 3. 58"l, can easily hold 3pcs credit card size cards. Waterproof and dustproof: easily open and close with the excellent resealable ziplock closure. Extra thickness: the thickness of this id badge holder is 06mm compares to 04mm or even thinner of generic items on the market.

Buy with confidence: opening is about 1/4” from top. Think of it as a ziplock bag. That makes the lanyard id holder high transparency and crystal-clear. Please contact us if any question. 6pcs vertical id holders in one pack. It's soft, smooth and durable, never leave creases or break even if folded repeatedly. Stay as new after long term use. Eco & safe: the name badge holder is made of premium pvc material, non-toxic, RoSH and REACH certified.

Perfect badge holder for id cards, credit cards, student card, bus pass, nurse name card, work card, membership card, exhibition card, hotel key cards and cruise cards etc. This waterproof and dustproof id card holder is great to keep your important paper badges or cards dry, clean and secure. No recycling plastic scrap, odorless and safe guaranteed.
BrandWill Well #ad
ManufacturerWill Well #ad
Part Number6