Smooth Cast 65D Liquid Plastic Casting Resin – Trial Unit

#ad
Smooth-On, Inc. 65D #ad - Smooth-cast 65d formerly smooth-Cast ROTO has a unique gradual cure profile that makes it ideal for rotational casting applications. Castings will be hollow and lightweight but have the appearance of being solid, allowing you to use less material to attain the same finished look substantially lowering your material costs.

Castings resist moisture and mild solvents and can be machined, sanded and painted. Semi-rigid plastic has good impact and abrasion resistance. 65d can also be cast solid for a variety of industrial and art-related applications. Vibrant colors are possible by adding SO-Strong color tints or Ignite color pigments.

Smooth Cast 65D Liquid Plastic Casting Resin - Trial Unit #ad - Mix ratio:1:1 by volume: POT LIFE: 2. 5 minute; demold time:10-15 minutes; mixed viscocity 2400 cps: shore hardness" 65d COLOR: WHITE Read MSDS before use - for more information visit www. Smooth-on. Com unique gradual cure profile that makes it ideal for rotational casting applications "roto-cast" in a machine or by hand.

Low-cost semi-rigid urethane casting resin. Low viscosity for minimal bubble entrapment. Fully cured castings are semi-rigid and exhibit good impact resistance.

#ad



Smooth-On Universal Mold Release 14 fl. oz.

#ad
Smooth-On 751635700109 #ad - Keep out of the Reach of Children. Features if using silicone rubber, seal model surface with SuperSeal only. If you've ever been to the movies, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, foams and other products to turn their ideas into 3-dimensional reality.

Properly used, universal mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold. Do not use Universal Mold Release. It will release mold rubbers such as polyurethanes and polysulfides from properly prepared models. Sealing porous models wood, plaster, concrete or certain modeling clays containing water or sulfur with Smooth-On SuperSeal or other sealer may be necessary.

Smooth-On Universal Mold Release 14 fl. oz. #ad - Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products. Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc.

. Universal mold release agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. Universal mold release will more than double the production life of the mold if you are casting urethane resin.

#ad



Fixit Sculpt - 1 lb. - 2 Part Epoxy Modeling Clay Compound

#ad
Ave's fixit1 #ad - From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.

Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, durable material, restorations, perfect for repairs, prototypes, ceramic work and more!. No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven.

Strong adhesive power - because it adheres to nearly any surface, embellishing, it's great for sculpting, bonding, and filling almost any project!. Easy to work with - with a 4 hour working time, you have plenty of time to get your repair just right. Lasting repairs - fixit sculpt is highly adhesive, and non-conductive, is waterproof, non-flammable, dries to be hard and durable, so you can count on your repairs to last a long time!.

Fixit Sculpt - 1 lb. - 2 Part Epoxy Modeling Clay Compound #ad - Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products. Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc.

#ad



Thi-Vex Silicone Thickening Agent - 1 oz. Bottle

#ad
Smooth-On, Inc. #ad - Thickens Smooth-On Silicones. Use for making Brush-On Molds. Thi-vex will not work with Mold Max 40 or Mold Max 60 silicones. Thi-vex is made especially for thickening Smooth-On silicones for vertical surface application making brush-on molds. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Only a small Amount Is Needed.

Different viscosities can be attained by varying the amount of THI-VEX. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, restorations, durable material, prototypes, perfect for repairs, ceramic work and more!.

Thi-Vex Silicone Thickening Agent - 1 oz. Bottle #ad - No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven. Strong adhesive power - because it adheres to nearly any surface, embellishing, bonding, it's great for sculpting, and filling almost any project!.

Easy to work with - with a 4 hour working time, you have plenty of time to get your repair just right.

#ad



Mold Star 20T Silicone Mold Making Rubber - Trial Unit

#ad
Smooth-On, Inc. #ad - Easy to mix: mixed 1a:1B by volume no weighing scale necessary. Mold star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume no weighing scale necessary. Keep out of the Reach of Children. Mold star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage.

6 min. From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Note: thi-vex is not compatible with Mold Star rubbers. Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.

Mold Star 20T Silicone Mold Making Rubber - Trial Unit #ad - Universal mold release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold. It will release mold rubbers from properly prepared models and easily releases a variety of casting materials epoxies, Smooth-On liquid plastics, etc. Molds made with mold star will last a long time in your mold library and are good for casting wax, resins, gypsum, concrete and other materials.

Mold star 20t: mix ratio: 1:1 by volume; pot life: 6 minutes; demold time: 30 minutes; sHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Only a small Amount Is Needed.

#ad



Trial Unit - Smooth-Cast 300 Liquid Plastic Compound

#ad
Smooth-On, Inc. SC300 #ad - From cured rubber molds. Using a silicone rubber mold without release agent limits the production life. Vacuum degassing is not necessary to yield castings that are virtually bubble free. Pot life: 3 minutes; Cure Time: 10 minutes. Read msds before use - Adult Supervision Required. Easy to mix: mixed 1a:1B by volume no weighing scale necessary.

Mix ratio: 1a: 1B by Volume. It offers the convenience of a one to one mix ratio by volume. Vacuum degassing is not necessary. 6 min. Thickens Smooth-On Silicones. 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable.

Trial Unit - Smooth-Cast 300 Liquid Plastic Compound #ad - Pot life / 30 min. Good for casting wax, resins, gypsum, concrete and other materials . Heat resistant up to 450°F 232°C. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.

Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, prototypes, restorations, perfect for repairs, durable material, ceramic work and more!. No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven.

#ad



FAST Curing Mold Making Silicone Kit - EASY! - Smooth-On OOMOO 25 - 2 Pints

#ad
Smooth-On SMOoomoo25 #ad - Shore 70D. Cures to an opaque blue-lavendar. Mix ratio: 1a: 1B by Volume. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, durable material, perfect for repairs, restorations, prototypes, ceramic work and more!.

No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven. Strong adhesive power - because it adheres to nearly any surface, bonding, embellishing, it's great for sculpting, and filling almost any project!.

FAST Curing Mold Making Silicone Kit - EASY! - Smooth-On OOMOO 25 - 2 Pints #ad - Easy to work with - with a 4 hour working time, you have plenty of time to get your repair just right. Lasting repairs - fixit sculpt is highly adhesive, and non-conductive, non-flammable, is waterproof, dries to be hard and durable, so you can count on your repairs to last a long time!. Thickening Liquid For Silicone Rubber.

No scale required. Oomoo 25 - fast setting 75 minute cure time. Oomoo 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.

#ad



Mold Star 16 FAST Moldmaking Silicone Rubber - Trial Unit

#ad
Smooth-On, Inc. #ad - No scale required. Oomoo 25 - fast setting 75 minute cure time. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, durable material, restorations, prototypes, perfect for repairs, ceramic work and more!.

No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven. Strong adhesive power - because it adheres to nearly any surface, embellishing, it's great for sculpting, bonding, and filling almost any project!.

Mold Star 16 FAST Moldmaking Silicone Rubber - Trial Unit #ad - Easy to work with - with a 4 hour working time, you have plenty of time to get your repair just right. Lasting repairs - fixit sculpt is highly adhesive, dries to be hard and durable, non-flammable, is waterproof, and non-conductive, so you can count on your repairs to last a long time!. Thickening Liquid For Silicone Rubber.

Mold star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Cure. Easy to mix: mixed 1a:1B by volume no weighing scale necessary.

#ad



Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325 - Ages 18+

#ad
Smooth-On SC325kit #ad - Great for craft moldmaking, home remodeling, candles, replicas, jewelry, and more!. East to use, equal parts A and B. Sets faster than Oomoo 30 Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers! Thickens Smooth-On Silicones. Pot life / 30 min. 10 minute demold time. 909 grams.

Technical Information: pot life: 2. 5 minutes, demold time depending on mass: 7-10 minutes, shrinkage:. 01 in. In. Viscosity: 100 cups, S. G. Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.

Smooth-On Smooth-Cast 325 ColorMatch Liquid Plastic Compound Smooth Cast 325 - Ages 18+ #ad - Repair with ease - fixit sculpt is an easy to work with compound that cures in 24 hours to be a strong, durable material, prototypes, restorations, perfect for repairs, ceramic work and more!. No baking - unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven.

Strong adhesive power - because it adheres to nearly any surface, embellishing, bonding, it's great for sculpting, and filling almost any project!. Easy to work with - with a 4 hour working time, you have plenty of time to get your repair just right.

#ad



Ejiubas 14 Pcs Clay Sculpting Tools Set 10Pcs Modeling Clay Rubber Brushes Silicone Sculpting with 4 Pcs Polymer Clay Balls Tools Double Ended Dotting Tool Kit

#ad
Ejiubas G-EJ4-09 #ad - Multiple methods & more choices*:23 methods!!! 5 pcs 2 way tool set for general purpose, each tool features for SPACE SAVING and Utilization; 4pcs 2 Way Ball stylus Tools for polymer Clay, double-ended metal ball tools provide more choices of balls; 5pcs rubber tip paint brushes, flexible tips almost as good as your own finger but you can get into tiny areas;.

Durable & lasting to use*: high quality, very good quality shaping tools. Cure. Easy to use 1:1 by volume ratio. Pot life / 30 min. For quick turnover of molds. Shore 70D. Well made, handles are thicker than most paint brushes. Sets faster than Oomoo 30 Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!

Ejiubas 14 Pcs Clay Sculpting Tools Set 10Pcs Modeling Clay Rubber Brushes Silicone Sculpting with 4 Pcs Polymer Clay Balls Tools Double Ended Dotting Tool Kit #ad - 10 minute demold time. There is no way for tips to fall out of the metal holding them; And all the balls of ball stylus tools are made of stainless steel, not easy to etch; the handle of pen is wood of spray painting, and the pen tip is made silicone;. Practical application**: these color shapers are excellent for blending for art, clay projects, soft pastels, oil painting, etc; And the Ball Stylus Tools excellent for embossing, art projects, charcoal, masking fluid, graphite, sculpting, such as colored pencils, clay, Pan Pastel, sculpture and other craft projects.

Universal mold release will more than double the production life of the mold if you are casting urethane resin. If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.

#ad



Aves Safety Solvent 1 Oz. - For Use With Apoxie & Fixit Products

#ad
Ave's ss1oz #ad - Powerful combinations & enough your need*: combination with THREE tool set, 14 pieces,great for Art of polymer clay,meet your various craft projects needs for different creative effect easily;. For whatever reason, you don't absolutely love your product, just contact us and we will do absolutely anything needed.

Finishing touch - this solvent is perfect for removing excess material, fingerprints, unwanted residue, and film from your projects. Safer option - aves safety solvent is safer than most all solvents available, and is a great replacement for acetone & other commonly used toxic solvents. Remove most sticky substances - Removes nearly any sticky substance: uncured epoxy, label residue, resins, sap, tar, honey!.

Aves Safety Solvent 1 Oz. - For Use With Apoxie & Fixit Products #ad - Great for cleaning tools - This solvent is great for cleaning residue from brushes, tools, and work surfaces. Specifications - conforms to astm d4236. Can be easily tinted with smooth-on so-strong colorants. Packaging may vary* Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness. Great for craft moldmaking, home remodeling, replicas, jewelry, candles, and more!.

East to use, equal parts A and B. Dot certified for shipping by air, land or sea. Used for Cosplay.

#ad