Greenlee 730-9/16 Knockout Punch Unit

#ad
Greenlee 730-9/16 #ad - Properly assembled through pilot holes, They will make clean, fast and accurate holes. Use with battery-powered, Hydraulic, ratchet or manual drivers. Punch, draw stud contents; 16 gauge mild steel capacity; 9/16 inch hole size; round punch type; used on battery-powered/hydraulic/ratchet/manual driver Round standard metal punch units are complete units consist of punch, die, die and draw stud.

Slug falls free in die. Can be used on mild steel up to 16 gauge.

#ad



Greenlee 36414 Step Bit

#ad
Greenlee 36414 #ad - Cut up through 3/8" mild steel, aluminum, brass, copper, wood, plastic and laminates. Hole sizes from 7/8" through 1-3/8" Step bit.

#ad



27mm Pack of 10 - Precision Brand Smooth Band Metric Worm Gear Hose Clamp, 16mm

#ad
Precision Brand 47185 #ad - The precision brand smooth band metric worm gear clamp has a stainless steel band and housing, and a plated steel screw, and is appropriate for use in critical hose connections. The screw is made of carbon steel that is zinc-plated for resistance to rust. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications.

Precision brand products manufactures products such as hose clamps, keystock, threaded rods, punch and die sets, shims, and wire. The company, il, founded in 1946 and headquartered in Downers Grove, meets International Organization for Standardization ISO standard 9001. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings.

27mm Pack of 10 - Precision Brand Smooth Band Metric Worm Gear Hose Clamp, 16mm #ad - Smooth form band helps provide even pressure around the hose. The band, housing and screw are made of stainless steel that conforms to the Society of Automotive Engineers SAE 400 series standard and provides resistance to corrosion wear. The 9 mm band has a smooth form that helps provide even pressure around the hose, and an efficient seal at low torque.

The pressed, non-perforated worm drive teeth and rounded, raised band edges help prevent damage to the hose. Zinc-plated carbon steel screw resists rust. Hose clamps attach hoses to fittings to prevent flow leakage. Series 400 stainless steel band helps provide resistance to corrosion and wear.

#ad



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10

#ad
Small Parts 188SS1399 #ad - Hardness commonly measured as indentation hardness describes its resistance to permanent surface deformation. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Meets astm a666 specifications. The 18-8 stainless steel material offers good resistance to corrosion and high temperatures.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Pressed tooth form and rounded, raised band edges help prevent damage to the hose. Shims are thin pieces of material placed between objects for a variety of uses, tighter seals, increased insulation, including added support, improved leveling, or better spacing.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.062" Thickness, 7/8" ID, 1-3/8" OD Pack of 10 #ad - Zinc-plated carbon steel screw resists rust. Smooth form band helps provide even pressure around the hose. It may be slightly magnetic. They also can be used to fill gaps between machine parts that are prone to wear. Unpolished mill surface has no finish. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures.

Standard tolerance. The 18-8 stainless steel round shim has an unpolished mill surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance.

#ad



Stainless Steel 316L Welded Round Tubing, 1/2" OD, 0.46" ID, 0.020" Wall, 12" Length

#ad
Eagle Stainless #ad - Welded and drawn tubing, also known as "drawn over mandrel" DOM, is typically welded tubing that is drawn through a die and over a mandrel to create a smooth inner diameter, which gives the tubing comparable corrosion resistance to seamless tubing while still offering welded tubing's tighter wall tolerances.

18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. The tubing is annealed to restore formability for bending or flaring the tubing and has an operating temperature range of -325 to +1, 500 degrees F. Welded tubing, made by rolling and welding metal sheet stock, is weaker than and not as rounded as seamless tubing, but it has a more consistent wall thickness for tighter wall tolerances.

Stainless Steel 316L Welded Round Tubing, 1/2" OD, 0.46" ID, 0.020" Wall, 12" Length #ad - Meets astm a666 specifications. Series 400 stainless steel band helps provide resistance to corrosion and wear. It is alloyed with molybdenum and has higher resistance to pitting and crevice corrosion in chloride environments than 304 stainless steel. Smooth form band helps provide even pressure around the hose.

Standard tolerance. Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel. Meets astm a269 specifications for quality assurance. Round metal tubing for transport of fluids and gases in chloride environments.

#ad



Greenlee 730-5/8 Knockout Punch Unit

#ad
Greenlee 730-5/8 #ad - Zinc-plated carbon steel screw resists rust. Welded and drawn construction for a smoother bore than welded tubing and a more consistent wall thickness than seamless tubing. Slug falls free in die. Standard tolerance. Round metal tubing for transport of fluids and gases in chloride environments. Use with battery-powered, Hydraulic, ratchet or manual drivers.

Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel. Pressed tooth form and rounded, raised band edges help prevent damage to the hose. Series 400 stainless steel band helps provide resistance to corrosion and wear. Meets astm a666 specifications. Can be used on mild steel up to 16 gauge.

Greenlee 730-5/8 Knockout Punch Unit #ad - Smooth form band helps provide even pressure around the hose. Punch, die, draw stud contents; 16 gauge mild steel Capacity; 5/8 inch hole size; round punch type; used on battery-powered/hydraulic/ratchet/manual driver Step bit. Annealed to restore formability for bending or flaring tubing. Meets astm a269 specifications for quality assurance.

Round standard metal punch units are complete units consist of punch, die and draw stud. Unpolished mill surface has no finish.

#ad



116 Silicone O-Ring, 70A Durometer, Red, 3/4" ID, 15/16" OD, 3/32" Width Pack of 100

#ad
Small Parts 116 #ad - Can be used across a wide temperature range from -65 degrees F -54 degrees C to 450 degrees F 232 degrees C. Meets standards defined by Aerospace Standard AS568A. Meets astm a269 specifications for quality assurance. Use with battery-powered, Hydraulic, ratchet or manual drivers. Properly assembled through pilot holes, They will make clean, fast and accurate holes.

Can be used on mild steel up to 16 gauge. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. Round standard metal punch units are complete units consist of punch, die and draw stud. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

116 Silicone O-Ring, 70A Durometer, Red, 3/4" ID, 15/16" OD, 3/32" Width Pack of 100 #ad - Standard tolerance. Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter ID, outer diameter OD, and cross-sectional CS diameter. This silicone o-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Unpolished mill surface has no finish. It has good resistance to ozone, engine and transmission oil, hydraulic fluids that resist fire, non-petroleum brake fluid, vegetable and animal oils, weather, detergent, salt water, and high molecular weight chlorinated aromatic hydrocarbons.

#ad



Merit Brass 4008-001-10 Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length Pack of 10

#ad
Merit Brass 4008-001-10 #ad - Round standard metal punch units are complete units consist of punch, die and draw stud. Series 400 stainless steel band helps provide resistance to corrosion and wear. Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries.

Step bit. Welded and drawn construction for a smoother bore than welded tubing and a more consistent wall thickness than seamless tubing. Meets astm a269 specifications for quality assurance. Properly assembled through pilot holes, They will make clean, fast and accurate holes. Annealed to restore formability for bending or flaring tubing.

Merit Brass 4008-001-10 Stainless Steel 304/304L Pipe Fitting, Close Nipple, Schedule 40 Welded, 1/2" NPT Male, 1-1/8" Length Pack of 10 #ad - Nipple for connecting and extending pipes. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Round in cross-section to provide a seal between cylindrical overlapping surfaces. Family-owned since 1937, the company is based in Cleveland, OH. Made of stainless steel 304L for strength.

Durometer hardness of 70A for resistance to penetration. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Round metal tubing for transport of fluids and gases in chloride environments.

#ad



18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.048" Thickness, 1" ID, 1-1/2" OD Pack of 5

#ad
Small Parts 188SS1387 #ad - Unpolished mill surface has no finish. Use with battery-powered, Hydraulic, ratchet or manual drivers. Low carbon content to ensure greater resistance to corrosion. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Made of stainless steel 304L for strength. Shims are thin pieces of material placed between objects for a variety of uses, improved leveling, tighter seals, increased insulation, including added support, or better spacing.

Standard tolerance. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. Unpolished mill surface has no finish. Welded and drawn construction for a smoother bore than welded tubing and a more consistent wall thickness than seamless tubing. Male national pipe Taper NPT threads for connecting female threaded pipes.

18-8 Stainless Steel Round Shim, Unpolished Mill Finish, Annealed, Hard Temper, ASTM A666, 0.048" Thickness, 1" ID, 1-1/2" OD Pack of 5 #ad - The 18-8 stainless steel round shim has an unpolished mill surface, meets American Society for Testing and Materials International ASTM A666 specifications, and has a standard tolerance. Annealed to restore formability for bending or flaring tubing. Smooth form band helps provide even pressure around the hose.

Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel.

#ad



Anderson Metals Brass Garden Hose Fitting, Connector, 1/2" Barb x 3/4" Male Hose

#ad
Anderson Metals 07048-0812 #ad - Step bit. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Pressed tooth form and rounded, raised band edges help prevent damage to the hose. Dual-certified 316/316l stainless steel for greater corrosion resistance than 304 stainless steel. Connects a hose on one end and a female GHT threaded connector on the other.

Male national pipe Taper NPT threads for connecting female threaded pipes. And its territories. Coupling for connecting a hose to a female connector. Durometer hardness of 70A for resistance to penetration. Barbed fitting for a tight seal on hoses. Low carbon content to ensure greater resistance to corrosion. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures.

Anderson Metals Brass Garden Hose Fitting, Connector, 1/2" Barb x 3/4" Male Hose #ad - Hose fittings have various types of connections, barbed, push-to-connect, dry disconnect, including threaded, and others including those based on internationally-accepted specifications. Can be used on mild steel up to 16 gauge. Meets astm a666 specifications. Properly assembled through pilot holes, They will make clean, fast and accurate holes.

Unpolished mill surface has no finish.

#ad



30 in. Wide - GRIDMANN 1 Compartment NSF Stainless Steel Commercial kitchen Prep & Utility Sink

#ad
GRIDMANN SINK-CS-GR03-CS24X #ad - Made of silicone for use with a variety of chemicals and fluids. Male national pipe Taper NPT threads for connecting female threaded pipes. Drain connections: Made to fit a standard 1-1/2" tailpiece/trap. Meets standards astm a733, ansi b1. 201, and astm a312/sa312 for quality assurance. This is normal and to be expected on products of this nature*** Step bit.

Zinc-plated carbon steel screw resists rust. Overall size - 30" wide, 36-1/2" deck height, 29-1/2" front to back, 44" backsplash height. Coupling for connecting a hose to a female connector. Annealed to restore formability for bending or flaring tubing. Can be used across a wide temperature range from -65 degrees F -54 degrees C to 450 degrees F 232 degrees C.

30 in. Wide - GRIDMANN 1 Compartment NSF Stainless Steel Commercial kitchen Prep & Utility Sink #ad - Meets astm a666 specifications. 18-8 stainless steel round shim provides good resistance to corrosion and high temperatures. Meets standards defined by Aerospace Standard AS568A. Includes basket strainer drain. Meets astm a666 specifications. Properly assembled through pilot holes, They will make clean, fast and accurate holes.

#ad